| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 96 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 111 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 163 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 186 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
In the fertile plains of Lakhisarai, the geology consists of deep, unconsolidated alluvial deposits including sand, silt, clay, and gravel. Unlike rocky terrains, the challenge in Lakhisarai is not the hardness of the ground, but the stability of the borehole. We utilize Direct Rotary or Reverse Rotary drilling technologies to manage these soft strata effectively. A crucial part of our service in Lakhisarai is the design of the assembly, where we strategically place 'V-Wire' screens or slotted pipes against the most productive sand aquifers. To prevent the 'sand-pumping' issue common in this region, we perform precision gravel packing, filling the annular space with graded pebbles to act as a natural filter. This ensures crystal-clear water and protects your submersible pump from premature wear and tear. Because Lakhisarai may have multiple aquifer layers, we help clients identify the second or third layer to avoid the risk of surface pollutants or agricultural runoff. Our development process includes high-velocity surging and air-compressor cleaning to stabilize the aquifer and maximize flow. This professional approach results in a high-discharge tube well capable of supporting large-scale irrigation or high-capacity residential requirements.
Technical Setup for Alluvial Terrain:
Direct Rotary (DR) Rig with Gravel Packing for Sand Aquifers.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Lakhisarai, the 6.5 inch dia drilling rate is ₹111 per feet. A typical 345 feet borewell here costs approximately ₹38,295 for drilling alone.
A: In Lakhisarai, the average water level is around 315 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 345 feet.
A: According to Bihar regulations, a minimum distance of 250 to 500 meters is often required from public water sources in Lakhisarai to prevent aquifer depletion.
A: While hard rock is tough to drill, our ₹111/ft rate in Lakhisarai is inclusive of standard Alluvial conditions unless extreme boulders are met.
A: For 345 feet in Lakhisarai, a 1.5 HP to 3 HP submersible pump is usually required depending on the required water discharge.
A: The Alluvial soil determines the bit type we use. Harder formations require tungsten carbide bits which we use as standard in Lakhisarai.
This Borewell Cost is also applicable to Lakhisarai, Barahiya, Surajgarha, Halsi, Pipariya, Ramgarh Chowk, Chanan, Luckeesarai, Kiul, Mankatha, Shishwa, Dumri, Jaitpur, Mednichauki, Salarpur, Gidhaur Road, Piroth, Amhara, Balgudar, Kavaiya.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.