| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 96 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 107 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 158 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 189 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
In the fertile plains of Hajipur, the geology consists of deep, unconsolidated alluvial deposits including sand, silt, clay, and gravel. Unlike rocky terrains, the challenge in Hajipur is not the hardness of the ground, but the stability of the borehole. We utilize Direct Rotary or Reverse Rotary drilling technologies to manage these soft strata effectively. A crucial part of our service in Hajipur is the design of the assembly, where we strategically place 'V-Wire' screens or slotted pipes against the most productive sand aquifers. To prevent the 'sand-pumping' issue common in this region, we perform precision gravel packing, filling the annular space with graded pebbles to act as a natural filter. This ensures crystal-clear water and protects your submersible pump from premature wear and tear. Because Hajipur may have multiple aquifer layers, we help clients identify the second or third layer to avoid the risk of surface pollutants or agricultural runoff. Our development process includes high-velocity surging and air-compressor cleaning to stabilize the aquifer and maximize flow. This professional approach results in a high-discharge tube well capable of supporting large-scale irrigation or high-capacity residential requirements.
Technical Setup for Alluvial Terrain:
Direct Rotary (DR) Rig with Gravel Packing for Sand Aquifers.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Hajipur, the 6.5 inch dia drilling rate is ₹107 per feet. A typical 380 feet borewell here costs approximately ₹40,660 for drilling alone.
A: In Hajipur, the average water level is around 280 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 380 feet.
A: It is a maintenance technique we use in Hajipur to remove silt and debris from the bottom of the well using high-pressure air.
A: The Alluvial soil determines the bit type we use. Harder formations require tungsten carbide bits which we use as standard in Hajipur.
A: Yes, we have specialized "Short-rigs" or sensor-operated machines for narrow spaces in Hajipur, though empty land is always easier for heavy machinery.
A: While hard rock is tough to drill, our ₹107/ft rate in Hajipur is inclusive of standard Alluvial conditions unless extreme boulders are met.
This Borewell Cost is also applicable to Hajipur, Lalganj, Mahua, Jandaha, Mahnar, Bidupur, Desri, Sahdei Buzurg, Raghopur, Bhagwanpur, Vaishali, Patepur, Chehra Kalan, Goraul, Patedhi Belsar, Rajapakar, Sonepur Road, Industrial Area, Paswan Chowk, Bagmali.
Hajipur, located at the confluence of the Gandak and Ganga rivers, sits on a deep layer of quaternary alluvium. The subsurface in areas like Paswan Chowk, Bagmali, and Adalpur is characterized by alternating layers of fine sand, silt, and thick clay patches. For a sustainable water yield that can withstand the receding water table during summer, the recommended borewell depth in Hajipur typically ranges between 250 to 450 feet. While water can be struck at shallower levels, these "perched" aquifers are prone to surface pollution and seasonal drying.
The groundwater in Hajipur is traditionally Sweet and pleasant to taste, especially in the deeper aquifers. However, being part of the Gangetic basin, it carries specific geogenic characteristics. Residents in Anjanpir and Konhara Ghat often notice a Metallic Taste in their water. This is due to a high Iron concentration, which often leaves yellowish or reddish stains on tiles and laundry when the water is exposed to air.
A significant concern for the Hajipur-Vaishali belt is the localized presence of Arsenic and Fluoride in specific pockets. While the Total Dissolved Solids (TDS) levels generally range between 250 to 500 ppm, which is well within the "Sweet Water" category, the chemical purity is a variable factor. In some eastern parts of the district, the water is classified as Hard Water, leading to scale formation in pipes and geysers. Because of these factors, installing a comprehensive Iron Removal Plant (IRP) or an RO system is a standard recommendation for ensuring the health and safety of the household.
Despite its proximity to the Gandak River, Hajipur city faces a significant gap in its municipal water distribution. The population boom in residential hubs like Hajipur Industrial Area and Minapur has outpaced the expansion of the public piped water system. For most residents, the municipal supply is either non-existent or restricted to just a few hours a day, which is often insufficient for modern multi-story apartments and growing families.
This creates a high dependency on private groundwater sources. In many new colonies on the outskirts of Hajipur, a borewell is the first utility established before construction even begins. The possibility of water shortage is high during the peak summer months when the shallow hand-pumps in the region often go dry. A deep borewell ensures a 24/7 supply that is independent of the fluctuations of the river-fed municipal grid. For both domestic and industrial units in the Vaishali district, a private borewell remains the only reliable safeguard against the region's inconsistent public infrastructure.
The extraction of groundwater in Hajipur is governed by the Bihar Ground Water Regulation and the local Vaishali District Administration guidelines. To ensure that the water table is not depleted unsustainably, especially near the industrial zones, a formal approval process is required.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.