| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 90 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 112 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 161 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 184 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
In the fertile plains of Banda, the geology consists of deep, unconsolidated alluvial deposits including sand, silt, clay, and gravel. Unlike rocky terrains, the challenge in Banda is not the hardness of the ground, but the stability of the borehole. We utilize Direct Rotary or Reverse Rotary drilling technologies to manage these soft strata effectively. A crucial part of our service in Banda is the design of the assembly, where we strategically place 'V-Wire' screens or slotted pipes against the most productive sand aquifers. To prevent the 'sand-pumping' issue common in this region, we perform precision gravel packing, filling the annular space with graded pebbles to act as a natural filter. This ensures crystal-clear water and protects your submersible pump from premature wear and tear. Because Banda may have multiple aquifer layers, we help clients identify the second or third layer to avoid the risk of surface pollutants or agricultural runoff. Our development process includes high-velocity surging and air-compressor cleaning to stabilize the aquifer and maximize flow. This professional approach results in a high-discharge tube well capable of supporting large-scale irrigation or high-capacity residential requirements.
Technical Setup for Alluvial Terrain:
Direct Rotary (DR) Rig with Gravel Packing for Sand Aquifers.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Banda, the 6.5 inch dia drilling rate is ₹112 per feet. A typical 310 feet borewell here costs approximately ₹34,720 for drilling alone.
A: In Banda, the average water level is around 285 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 310 feet.
A: Excessive extraction can lower the water table in Banda. We promote sustainable drilling and mandatory RWH (Rain Water Harvesting) for all our clients.
A: It is a maintenance technique we use in Banda to remove silt and debris from the bottom of the well using high-pressure air.
A: Yes, under the Uttar Pradesh Ground Water Act, registration is mandatory. In Banda, we assist clients in obtaining the necessary NOC (No Objection Certificate) before drilling starts.
A: The main requirements in Banda are an application to the Water Authority, a location map, and adherence to the Uttar Pradesh spacing norms.
This Borewell Cost is also applicable to Banda City, Atarra, Baberu, Naraini, Pailani, Bisanda, Oran, Tindwari, Jaspura, Kamasin, Mahona, Girwan, Mataundh, Khurhand, Badousa, Pangara, Gureh, Chilla, Sihonda, Murwal.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.