| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 91 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 100 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 159 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 185 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
In the fertile plains of Azamgarh, the geology consists of deep, unconsolidated alluvial deposits including sand, silt, clay, and gravel. Unlike rocky terrains, the challenge in Azamgarh is not the hardness of the ground, but the stability of the borehole. We utilize Direct Rotary or Reverse Rotary drilling technologies to manage these soft strata effectively. A crucial part of our service in Azamgarh is the design of the assembly, where we strategically place 'V-Wire' screens or slotted pipes against the most productive sand aquifers. To prevent the 'sand-pumping' issue common in this region, we perform precision gravel packing, filling the annular space with graded pebbles to act as a natural filter. This ensures crystal-clear water and protects your submersible pump from premature wear and tear. Because Azamgarh may have multiple aquifer layers, we help clients identify the second or third layer to avoid the risk of surface pollutants or agricultural runoff. Our development process includes high-velocity surging and air-compressor cleaning to stabilize the aquifer and maximize flow. This professional approach results in a high-discharge tube well capable of supporting large-scale irrigation or high-capacity residential requirements.
Technical Setup for Alluvial Terrain:
Direct Rotary (DR) Rig with Gravel Packing for Sand Aquifers.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Azamgarh, the 6.5 inch dia drilling rate is ₹100 per feet. A typical 375 feet borewell here costs approximately ₹37,500 for drilling alone.
A: In Azamgarh, the average water level is around 265 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 375 feet.
A: Summer months (March to June) are best in Azamgarh because the water table is at its lowest, ensuring your well never goes dry in the future.
A: Yes, apartments in Azamgarh usually require high-yield 6.5 or 7.5-inch wells drilled to 375 feet with high-HP pumps.
A: Yes, under the Uttar Pradesh Ground Water Act, registration is mandatory. In Azamgarh, we assist clients in obtaining the necessary NOC (No Objection Certificate) before drilling starts.
A: Robotic or sensor-based drilling in Azamgarh is more precise and slightly more expensive than the base ₹100/ft rate but ensures higher safety.
This Borewell Cost is also applicable to Azamgarh City, Nizamabad, Phulpur, Lalganj, Sagri, Mehnagar, Burhanpur, Mubarakpur, Sarai Mir, Bilariaganj, Jiyanpur, Atraulia, Jahanaganj, Mohammadpur, Martinganj, Tarwa, Ahiraula, Koilsa, Pawai, Kandhrapur.
In Azamgarh district, the extraction of groundwater is strictly regulated by the Uttar Pradesh Ground Water (Management and Regulation) Rules. Property owners in urban areas like Civil Lines, Sidhari, and those near the Azamgarh City railway station must obtain mandatory registration from the District Ground Water Management Council. For residential and domestic users, the process involves an online application through the UPGWD portal, where land ownership records and a site map verified by the local Revenue Inspector are required. In semi-critical blocks such as Jahanaganj or Bilariyaganj, additional scrutiny is applied to ensure that new boring does not adversely affect the existing community water table. It is essential to register both new and existing borewells to avoid penalties and to facilitate the legal installation of high-capacity submersible pumps. For commercial or industrial projects near the Purvanchal Expressway or ITI areas, a full No Objection Certificate (NOC) and a rainwater harvesting plan must be submitted for approval before any drilling rig can be mobilized.
The geography of Azamgarh is characterized by the fertile Indo-Gangetic alluvium, featuring thick layers of sand, silt, and clay deposited by the Tamsa and Ghaghara rivers. Unlike the rocky terrains of Southern India, drilling in Azamgarh typically utilizes direct rotary or reverse circulation rigs. In most parts of the district, including Mehnagar and Phulpur, the primary aquifer is reached at relatively shallow depths of 150 to 300 feet. However, due to the increasing demand for irrigation and domestic use in towns like Mubarakpur, many modern borewells are now extending to the second or third aquifer layers at 400 to 600 feet to ensure a perennial supply. The cost of a borewell here is largely driven by the diameter of the PVC casing pipes and the quality of the "gravel packing" used to filter out fine silt. While the success rate in this alluvial belt is exceptionally high (often exceeding 95%), the primary challenge is the potential for "sand pumping," which can reduce the life of the borewell if the screen design is not precisely matched to the local soil strata.
Water quality in Azamgarh is generally characterized as "sweet" and palatable, though it carries a specific mineral profile typical of the eastern Uttar Pradesh plains. In central Azamgarh and areas like Sagri, the Total Dissolved Solids (TDS) typically range between 350 and 600 ppm, which is well within the acceptable limits for domestic use. However, the water is often classified as "hard" due to the presence of calcium and magnesium bicarbonates, which can lead to scaling in water heaters and pipes over time. Some pockets in the district have reported elevated levels of iron, resulting in a slight metallic taste and reddish staining on laundry. Unlike coastal regions, there is no risk of salinity or brackishness. For residents in densely populated urban clusters, using a basic RO (Reverse Osmosis) or a dedicated iron-removal filter is recommended to ensure the water is soft and free from mineral aftertastes, providing a safer drinking water standard for the household.
Azamgarh district remains heavily dependent on groundwater for both its agrarian economy and its rising urban population. While the district benefits from a network of canals and the presence of the Tamsa River, the municipal piped water supply in the Azamgarh Nagar Palika and surrounding towns like Sarai Mir is often limited to specific hours and may not reach every household. This supply-demand gap makes a private borewell a critical necessity for residents to ensure 24/7 water security. During the peak summer months, the risk of a water shortage increases as shallow hand pumps often go dry, forcing a reliance on deeper motorized borewells. In newly developed residential colonies along the Gorakhpur-Varanasi road, an independent water source is considered the most reliable asset. To combat the declining water table and ensure long-term availability, the local administration strongly encourages the integration of rooftop rainwater harvesting with all new borewell installations, especially in the more water-stressed blocks of the district.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.