| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 90 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 113 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 166 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 192 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
In the fertile plains of Sikar, the geology consists of deep, unconsolidated alluvial deposits including sand, silt, clay, and gravel. Unlike rocky terrains, the challenge in Sikar is not the hardness of the ground, but the stability of the borehole. We utilize Direct Rotary or Reverse Rotary drilling technologies to manage these soft strata effectively. A crucial part of our service in Sikar is the design of the assembly, where we strategically place 'V-Wire' screens or slotted pipes against the most productive sand aquifers. To prevent the 'sand-pumping' issue common in this region, we perform precision gravel packing, filling the annular space with graded pebbles to act as a natural filter. This ensures crystal-clear water and protects your submersible pump from premature wear and tear. Because Sikar may have multiple aquifer layers, we help clients identify the second or third layer to avoid the risk of surface pollutants or agricultural runoff. Our development process includes high-velocity surging and air-compressor cleaning to stabilize the aquifer and maximize flow. This professional approach results in a high-discharge tube well capable of supporting large-scale irrigation or high-capacity residential requirements.
Technical Setup for Alluvial Terrain:
Direct Rotary (DR) Rig with Gravel Packing for Sand Aquifers.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Sikar, the 6.5 inch dia drilling rate is ₹113 per feet. A typical 365 feet borewell here costs approximately ₹41,245 for drilling alone.
A: In Sikar, the average water level is around 310 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 365 feet.
A: The ₹113 per feet rate usually covers only the drilling. Submersible pumps and cable installation in Sikar are calculated separately based on depth.
A: Rainwater harvesting is the best way to recharge dry wells in Sikar. We install recharge pits that channel terrace water into your Alluvial aquifers.
A: The ideal depth in Sikar is typically around 365 feet. However, this varies based on the specific Alluvial terrain of your plot.
A: A professionally drilled well in Sikar using high-quality materials can last 20-30 years, especially in stable Alluvial formations.
This Borewell Cost is also applicable to Sikar Town, Lakshmangarh, Fatehpur, Neem Ka Thana, Dantaramgarh, Khandela, Reengus, Sri Madhopur, Ramgarh Shekhawati, Losal, Ajitgarh, Piprali, Katrathal, Sikar Rural, Jaipur Road, Jhunjhunu Road, Nawalgarh Road, Bajaj Gram, Palsana, Khachariawas.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.