| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 94 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 107 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 155 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 182 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
The landscape of Harda is characterized by the Deccan Trap formations, consisting of multiple layers of volcanic basalt. Drilling in this terrain requires a specialized understanding of 'flow' geology, where hard, compact basalt often alternates with softer 'red bole' clay or vesicular basalt. In Harda, the most productive aquifers are typically found in the vesicular zones where gas bubbles once created natural storage spaces for groundwater. Our drilling rigs are equipped to handle these alternating strata, using casing pipes to seal off loose clay layers that could otherwise lead to 'caving' or jamming the drill string. We pay close attention to the inter-flow zones, as these are critical for high-yield borewells. In the dry summer months of Harda, the water table can fluctuate significantly, which is why we suggest drilling deeper to tap into the perennial secondary aquifers. Our engineering team provides custom pump selection based on the specific yield of the basaltic layers. Furthermore, we emphasize 'Hydro-fracturing' services for existing low-yield wells in the region to open up blocked water channels. This expertise ensures that your investment in a borewell provides maximum water discharge throughout the year.
Technical Setup for Deccan Trap Terrain:
Combination Rig for Alternating Basalt and Red-Bole Layers.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Harda, the 6.5 inch dia drilling rate is ₹107 per feet. A typical 355 feet borewell here costs approximately ₹37,985 for drilling alone.
A: In Harda, the average water level is around 300 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 355 feet.
A: A professional geologist survey in Harda costs between ₹3,000 and ₹7,000 and significantly increases the success rate in Deccan Trap areas.
A: PVC casing pipes in Harda vary by brand. For Deccan Trap terrain, we use Class-4 or Class-5 pipes to withstand underground pressure.
A: Industrial wells in Harda start with larger diameters and involve EIA (Environmental Impact Assessment) costs in addition to the drilling rate.
A: 8-inch borewells are used for commercial or agricultural use in Harda. The rate is higher than the ₹107/ft residential rate due to heavy equipment requirements.
This Borewell Cost is also applicable to Harda Town, Khirkiya, Timarni, Sirali, Handia, Rahatgaon, Magardha, Chhipavad, Rehatgaon, Abgaon, Kanjharda, Sodalpur, Harda Rural, Indore Road, Hoshangabad Road, Station Area, Civil Lines, Kulharda, Pidgaon, Nosar.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.