| Water Level | 255 Feet |
|---|---|
| Ideal Borewell depth | 400 Feet |
| Good Borewell depth | 430 Feet |
| 4.5 Inch Dia Drilling Rate | Small Home | ₹ 94 / Feet |
|---|---|---|
| 6.5 Inch Dia Drilling Rate | Home / Flats / Shops | ₹ 108 / Feet |
| 7.5 Inch Dia Drilling Rate | Commercial / Society | ₹ 165 / Feet |
| 12 Inch Dia Drilling Rate | Agriculture / Industry | ₹ 190 / Feet |
| Total drilling Cost | ₹ 37600 |
|---|---|
| * PVC Pipe Cost | ₹ 16400 |
| Additional Cost for Narrow Space / Equipment | ₹ 4000 |
| Total Bore well Cost / Estimate | ₹ 58000 |
| Total drilling Cost | ₹ 43200 |
|---|---|
| *PVC Pipe Cost | ₹ 22000 |
| Additional Cost for Narrow Space | ₹ 6000 |
| Total Bore well Cost / Estimate | ₹ 71200 |
| Total drilling Cost | ₹ 66000 |
|---|---|
| *PVC Pipe Cost | ₹ 26400 |
| Additional Cost for Narrow Space | ₹ 8000 |
| Total Bore well Cost / Estimate | ₹ 100400 |
| Total drilling Cost | ₹ 76000 |
|---|---|
| *PVC Pipe Cost | ₹ 38000 |
| Additional Cost for Narrow Space | ₹ 10000 |
| Total Bore well Cost / Estimate | ₹ 124000 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
In the fertile plains of Rohtak, the geology consists of deep, unconsolidated alluvial deposits including sand, silt, clay, and gravel. Unlike rocky terrains, the challenge in Rohtak is not the hardness of the ground, but the stability of the borehole. We utilize Direct Rotary or Reverse Rotary drilling technologies to manage these soft strata effectively. A crucial part of our service in Rohtak is the design of the assembly, where we strategically place 'V-Wire' screens or slotted pipes against the most productive sand aquifers. To prevent the 'sand-pumping' issue common in this region, we perform precision gravel packing, filling the annular space with graded pebbles to act as a natural filter. This ensures crystal-clear water and protects your submersible pump from premature wear and tear. Because Rohtak may have multiple aquifer layers, we help clients identify the second or third layer to avoid the risk of surface pollutants or agricultural runoff. Our development process includes high-velocity surging and air-compressor cleaning to stabilize the aquifer and maximize flow. This professional approach results in a high-discharge tube well capable of supporting large-scale irrigation or high-capacity residential requirements.
Technical Setup for Alluvial Terrain:
Direct Rotary (DR) Rig with Gravel Packing for Sand Aquifers.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Rohtak, the 6.5 inch dia drilling rate is ₹108 per feet. A typical 400 feet borewell here costs approximately ₹43,200 for drilling alone.
A: In Rohtak, the average water level is around 255 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 400 feet.
A: Yes, the Haryana government often provides subsidies for SC/ST farmers. Contact the Rohtak agricultural department for the latest schemes.
A: We provide a warranty on the materials (pipes/pumps) and guarantee the drilling depth as per the ₹108/ft agreement in Rohtak.
A: The Alluvial soil determines the bit type we use. Harder formations require tungsten carbide bits which we use as standard in Rohtak.
A: Yes, apartments in Rohtak usually require high-yield 6.5 or 7.5-inch wells drilled to 400 feet with high-HP pumps.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.