| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 91 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 109 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 157 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 191 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
In the fertile plains of Porompat, the geology consists of deep, unconsolidated alluvial deposits including sand, silt, clay, and gravel. Unlike rocky terrains, the challenge in Porompat is not the hardness of the ground, but the stability of the borehole. We utilize Direct Rotary or Reverse Rotary drilling technologies to manage these soft strata effectively. A crucial part of our service in Porompat is the design of the assembly, where we strategically place 'V-Wire' screens or slotted pipes against the most productive sand aquifers. To prevent the 'sand-pumping' issue common in this region, we perform precision gravel packing, filling the annular space with graded pebbles to act as a natural filter. This ensures crystal-clear water and protects your submersible pump from premature wear and tear. Because Porompat may have multiple aquifer layers, we help clients identify the second or third layer to avoid the risk of surface pollutants or agricultural runoff. Our development process includes high-velocity surging and air-compressor cleaning to stabilize the aquifer and maximize flow. This professional approach results in a high-discharge tube well capable of supporting large-scale irrigation or high-capacity residential requirements.
Technical Setup for Alluvial Terrain:
Direct Rotary (DR) Rig with Gravel Packing for Sand Aquifers.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Porompat, the 6.5 inch dia drilling rate is ₹109 per feet. A typical 375 feet borewell here costs approximately ₹40,875 for drilling alone.
A: In Porompat, the average water level is around 305 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 375 feet.
A: In Porompat, the drilling cost for a standard 6.5-inch borewell starts at approximately ₹109 per feet. The total price depends on the final depth and the casing pipe quality used.
A: In Manipur, rates vary by district. In Porompat, we offer a competitive price of ₹109 per feet with no hidden charges.
A: Casing pipe costs in Porompat depend on whether you use MS (Mild Steel) or PVC. Given the Alluvial soil, we recommend heavy-duty pipes to prevent borehole collapse.
A: In Manipur, borewells are usually deeper and drilled in rock, while tubewells are common in alluvial soil. Porompat mainly requires deep borewells due to its Alluvial nature.
This Borewell Cost is also applicable to Porompat, Sawombung, Keirao Bitra, Heingang, Lamlai, Khundrakpam, Kshetrigao, Thongju, Irilbung, Akampat, Kongba, Khurai, Mantripukhri, Top Khonghampat, Sagolmang, Yaingangpokpi, Andro, Yairipok (East), Telou, Napet Palli.
Porompat, the administrative hub of Imphal East, is situated within the Manipur Valley, an intermontane basin filled with thick fluvio-lacustrine deposits. The subsurface geology primarily consists of soft clay, silt, and fine-to-medium sand, often extending to significant depths. In Porompat and surrounding areas like Khurai and Heingang, the approximate borewell depth required generally ranges from 150 to 300 feet. However, due to the high clay content in the valley's upper strata, reaching a sustainable sand aquifer sometimes necessitates drilling up to 400 feet. The cost involved in Imphal East is influenced by the "Direct Rotary" or "Reverse Rotary" drilling methods, which are most effective for the soft, alluvial soil of the valley. Unlike the rocky interior of Manipur, drilling here requires extensive casing—often high-grade PVC or MS pipes—to prevent the borewell from collapsing in the "running sand" layers.
The groundwater in Imphal East is generally "Sweet" and palatable, but it is heavily influenced by the organic-rich sediments of the valley. Residents in Porompat and nearby Ayangpalli often encounter "Hard Water" with a distinct "Metallic Taste." This is primarily due to the high iron content prevalent in the groundwater of the Manipur Valley. It is common for the water to appear clear when pumped but turn yellowish or reddish upon exposure to air, a classic sign of dissolved iron minerals.
Imphal East relies significantly on surface water from the Imphal River and the Iril River, with the Porompat Water Supply plant serving as a major hub. However, despite being in a high-rainfall zone, the district faces frequent water shortage possibilities during the dry winter and pre-monsoon months. The aging municipal infrastructure and the rapid urbanization of areas like Mantripukhri and Wangkhei often lead to inconsistent supply in the local corporation water network.
Is a borewell required in Porompat? For most independent households, hospitals, and government quarters in the headquarters, a borewell is considered a mandatory secondary source. While the river-fed supply is preferred, its erratic nature makes private borewells the only reliable way to ensure 24/7 water availability. For the agricultural communities in the outskirts of Imphal East, borewells are also becoming vital for vegetable cultivation during the lean season when river levels drop.
Groundwater extraction in Manipur is governed by the Manipur Ground Water (Resource, Regulation, and Control) Act. In Imphal East, the authorities have become more vigilant about unregulated drilling to prevent land subsidence and groundwater contamination in the densely populated valley areas.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.