| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 97 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 115 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 158 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 187 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
The geological formation of Kailashahar is primarily sedimentary, characterized by layers of sandstone, shale, and occasionally limestone. These 'stratified' rocks provide unique challenges and opportunities for groundwater extraction. Sandstone acts as a fantastic natural filter and reservoir, often yielding high volumes of water, while shale layers can be 'swelling' or 'caving' in nature. In Kailashahar, we use a combination of rotary and DTH drilling depending on the degree of rock consolidation. One of the unique features of sedimentary areas like Kailashahar is the potential for 'Karst' features in limestone, where underground cavities can hold vast amounts of water. However, these cavities can also cause 'loss of circulation' during drilling, which our experienced crew manages using specialized mud additives. We ensure that the casing design is robust enough to handle the lateral pressure of shifting shale layers. Our water quality analysis in Kailashahar often focuses on mineral content, as sedimentary rocks can contribute to hardness or iron levels. By customizing the screen placement and using high-quality UPVC casing, we ensure that your borewell is protected from siltation and chemical corrosion, providing a steady stream of water for decades to come.
Technical Setup for Sedimentary Terrain:
Mud-Rotary Drilling for Sandstone and Shale Formations.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Kailashahar, the 6.5 inch dia drilling rate is ₹115 per feet. A typical 380 feet borewell here costs approximately ₹43,700 for drilling alone.
A: In Kailashahar, the average water level is around 290 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 380 feet.
A: While the owner must apply, we provide all the technical details, depth reports, and Sedimentary charts required by the Kailashahar authorities.
A: Groundwater in Kailashahar is generally good, but since the terrain is Sedimentary, we recommend a TDS test. We provide water testing services post-drilling to ensure safety.
A: Industrial wells in Kailashahar start with larger diameters and involve EIA (Environmental Impact Assessment) costs in addition to the drilling rate.
A: Most residential borewells in Kailashahar require a 3-phase connection, although single-phase submersible pumps are available for depths up to 250 feet.
This Borewell Cost is also applicable to Kailasahar, Kumarghat, Unakoti Hill Area, Pecharthal, Fatikroy, Pabiachara, Gournagar, Chandipur, Irani, Bhagaban Nagar, Kanchanbari, Saidabari, Murticherra, Samurail, Golakpur, Dampura, Ratiabari, Chantaibari, Manu Valley, Unakoti Tourism Hub.
Kailashahar, the administrative center of the Unakoti district, is situated in the fertile Manu River valley, surrounded by the scenic Unakoti hills. The geological profile here consists primarily of thick alluvial deposits, fine sand, and clay layers, which requires a specialized approach to drilling. For residential and commercial needs in areas like Boulapasa, Govindpura, and Srirampur, the average borewell depth ranges between 200 to 450 feet. Unlike the rocky terrains of the south, the type of borewell favored here is the Rotary Mud circulation method. The cost involved is largely determined by the necessity of high-quality, corrosion-resistant casing pipes and precision sand-screening to prevent silt from entering the system. While the borewell success rate is high due to the high water table near the riverbanks, the primary difficulty is navigating the fine "running sand" layers that can lead to borehole instability if not handled by experienced local drillers. A properly screened well in this valley can provide a reliable life of 15 to 20 years.
The groundwater in the Kailashahar region is generally Sweet and Potable, benefiting from natural filtration through the local alluvial strata. However, the most significant localized concern is a high concentration of dissolved iron, which often imparts a distinct Metallic Taste and can cause reddish-brown staining on household fixtures. In neighborhoods such as Kachar Ghat and Pytor Bazar, residents frequently report Hard Water characteristics, though the Total Dissolved Solids (TDS) levels remain within manageable limits compared to coastal regions. There is virtually no risk of Salty or Brackish water in this inland town. To ensure the water is suitable for all domestic purposes, most households in the Kailashahar Municipal Council area integrate iron removal plants (IRPs) or basic sediment filters to address the mineral content and improve the overall taste and clarity of the supply.
Kailashahar exhibits a significant water dependency on both surface and sub-surface resources. While the Manu River is the lifeline of the town, the aging infrastructure of the main water treatment plants often leads to a water shortage possibility. Recent years have seen frequent disruptions in the municipal supply due to mechanical breakdowns at the river-side pump houses, affecting localities like Kazirgaon and Durgapur. Consequently, a private borewell is highly required for residents to ensure a consistent daily supply for drinking and sanitation. The reliance on groundwater becomes even more critical during the dry winter months when river levels recede. In the outskirts and rural wards of the Gournagar Block, where piped water infrastructure is still developing, deep tube wells serve as the primary and most dependable source of water for the community.
The borewell approval procedure in Kailashahar is managed under the guidelines of the Tripura Drinking Water and Sanitation (DWS) Department and the Central Ground Water Authority. Residents intending to sink a new well must provide a formal intimation or application to the Kailashahar Municipal Council or the office of the District Magistrate (Unakoti). The application typically requires land ownership records (Khatian), a site map, and a declaration of the intended water use. For commercial or large-scale extraction, a No Objection Certificate (NOC) is mandatory to ensure that the extraction does not adversely affect the local water table or neighboring wells. It is essential for property owners to hire licensed drilling agencies familiar with the local soil conditions and administrative requirements of the Unakoti District to ensure the installation is legally compliant and environmentally sustainable.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.