| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 95 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 101 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 165 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 194 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
In the fertile plains of Imphal, the geology consists of deep, unconsolidated alluvial deposits including sand, silt, clay, and gravel. Unlike rocky terrains, the challenge in Imphal is not the hardness of the ground, but the stability of the borehole. We utilize Direct Rotary or Reverse Rotary drilling technologies to manage these soft strata effectively. A crucial part of our service in Imphal is the design of the assembly, where we strategically place 'V-Wire' screens or slotted pipes against the most productive sand aquifers. To prevent the 'sand-pumping' issue common in this region, we perform precision gravel packing, filling the annular space with graded pebbles to act as a natural filter. This ensures crystal-clear water and protects your submersible pump from premature wear and tear. Because Imphal may have multiple aquifer layers, we help clients identify the second or third layer to avoid the risk of surface pollutants or agricultural runoff. Our development process includes high-velocity surging and air-compressor cleaning to stabilize the aquifer and maximize flow. This professional approach results in a high-discharge tube well capable of supporting large-scale irrigation or high-capacity residential requirements.
Technical Setup for Alluvial Terrain:
Direct Rotary (DR) Rig with Gravel Packing for Sand Aquifers.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Imphal, the 6.5 inch dia drilling rate is ₹101 per feet. A typical 360 feet borewell here costs approximately ₹36,360 for drilling alone.
A: In Imphal, the average water level is around 255 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 360 feet.
A: It is tight, but our compact crawler rigs in Imphal can operate in very small footprints, provided there is vertical clearance.
A: Rainwater harvesting is the best way to recharge dry wells in Imphal. We install recharge pits that channel terrace water into your Alluvial aquifers.
A: Muddy water usually indicates a casing failure or poor filtration in the Alluvial layer. We offer repair and re-casing services across Imphal.
A: Industrial wells in Imphal start with larger diameters and involve EIA (Environmental Impact Assessment) costs in addition to the drilling rate.
This Borewell Cost is also applicable to Imphal City, Lamphelpat, Lamsang, Patsoi, Wangoi, Konthoujam, Sagolband, Uripok, Keishamthong, Singjamei, Langthabal, Sekmai, Mayang Imphal, Canchipur, MU Campus Area, Tera, Kwakeithel, Naoremthong, Iroisemba, Lilong Chajaba.
Imphal, the capital of Manipur, is situated in a unique intermontane valley characterized by fluvial-lacustrine deposits. While the region receives significant rainfall, the Imphal valley faces a paradoxical water situation. Rapid, unplanned urbanization and an increasing population have placed immense pressure on existing surface water sources, such as rivers and ponds. Consequently, the reliance on groundwater has surged. In many residential and commercial areas across Imphal West and Imphal East districts, public water supply infrastructure often proves inadequate to meet the rising demand, particularly during the pre-monsoon season. As a result, borewells have become an essential secondary source for household and domestic needs, serving as a critical buffer against the intermittent nature of public municipal supply.
Groundwater extraction in Imphal is governed by evolving state-level regulations focused on sustainable resource management. Property owners planning to drill a new borewell must comply with the guidelines set forth by the Imphal Municipal Corporation and relevant state authorities. The registration of all existing and new wells is becoming increasingly mandatory to monitor aquifer health. Applicants are typically required to demonstrate that their proposed borewell will not interfere with public drinking water sources. Furthermore, in alignment with modern building bye-laws and environmental protection acts, the installation of rainwater harvesting systems on the premises is often a prerequisite for obtaining drilling approval. Unauthorized or unregistered drilling is increasingly subject to scrutiny and potential environmental penalties. It is highly advised to contact the local municipal body or the district Public Health Engineering department to obtain the most recent permit requirements before contracting any drilling services.
The groundwater quality in the Imphal valley is highly variable and significantly influenced by the local geological structure. Residents frequently encounter "hard water," which may contain elevated concentrations of calcium and magnesium salts, often resulting in scaling in household plumbing and appliances. A notable concern in various parts of the valley is the presence of naturally occurring iron and, in some pockets, localized arsenic contamination that can exceed permissible safety limits. The water may sometimes exhibit a metallic taste or turbidity depending on the soil composition and the depth of the aquifer tapped. Given these potential risks, it is imperative for households to conduct professional laboratory water quality testing for chemical and biological parameters before using borewell water for drinking or cooking. Many residents utilize domestic purification systems, such as Reverse Osmosis (RO) units, to ensure the water is safe for daily consumption.
Drilling for water in Imphal presents specific technical challenges due to the valley's soft, sedimentary, and fluvio-lacustrine soil profiles. The average depth for a functional borewell in the region often ranges between 300 to 500 feet, though successful depths vary by locality. Unlike the hard rock regions of peninsular India, the soil structure in the valley can be prone to collapse, necessitating the use of high-quality casing pipes throughout the depth of the well to ensure structural stability. Scientific geohydrological surveys are highly recommended to identify the best drilling points, as improper site selection can lead to low-yield or ineffective wells. Costs vary based on the drilling diameter, depth, and the type of rig used. Key challenges include maintaining the well against silt and sand accumulation and preventing the contamination of groundwater from surface runoff. To ensure the borewell remains a long-term asset, property owners must prioritize periodic maintenance, professional flushing, and the implementation of on-site rainwater harvesting to support the local water table.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.