| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 97 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 107 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 159 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 183 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
In the fertile plains of Faridkot, the geology consists of deep, unconsolidated alluvial deposits including sand, silt, clay, and gravel. Unlike rocky terrains, the challenge in Faridkot is not the hardness of the ground, but the stability of the borehole. We utilize Direct Rotary or Reverse Rotary drilling technologies to manage these soft strata effectively. A crucial part of our service in Faridkot is the design of the assembly, where we strategically place 'V-Wire' screens or slotted pipes against the most productive sand aquifers. To prevent the 'sand-pumping' issue common in this region, we perform precision gravel packing, filling the annular space with graded pebbles to act as a natural filter. This ensures crystal-clear water and protects your submersible pump from premature wear and tear. Because Faridkot may have multiple aquifer layers, we help clients identify the second or third layer to avoid the risk of surface pollutants or agricultural runoff. Our development process includes high-velocity surging and air-compressor cleaning to stabilize the aquifer and maximize flow. This professional approach results in a high-discharge tube well capable of supporting large-scale irrigation or high-capacity residential requirements.
Technical Setup for Alluvial Terrain:
Direct Rotary (DR) Rig with Gravel Packing for Sand Aquifers.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Faridkot, the 6.5 inch dia drilling rate is ₹107 per feet. A typical 360 feet borewell here costs approximately ₹38,520 for drilling alone.
A: In Faridkot, the average water level is around 310 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 360 feet.
A: In Punjab, rates vary by district. In Faridkot, we offer a competitive price of ₹107 per feet with no hidden charges.
A: 8-inch borewells are used for commercial or agricultural use in Faridkot. The rate is higher than the ₹107/ft residential rate due to heavy equipment requirements.
A: Our team is rated as a top service provider in Faridkot, offering transparent pricing at ₹107/ft and using advanced Alluvial-specific technology.
A: A 6.5-inch borewell is ideal for homes in Faridkot. At ₹107 per feet for drilling, a 360 feet well plus casing pipes usually fits a standard residential budget.
This Borewell Cost is also applicable to Faridkot Town, Kotkapura, Jaiton, Sadiq, Bajakhana, Bargari, Panjgrain Kalan, Deep Singh Wala, Golewala, Dogar Basti, Sandhwan, Guru Ki Dhab, Machaki Mal Singh, Faridkot Rural, Talwandi Road, Ferozepur Road, Kotkapura Road, Chahal, Jand Sahib, Devi Wala.
Faridkot, situated in the fertile Malwa belt of Punjab, is characterized by its deep alluvial plains composed of sand, silt, and clay. The geological structure is part of the Indo-Gangetic basin, where the absence of hard rock makes drilling relatively straightforward but technically demanding in terms of filtration. In Faridkot city and nearby towns like Kotkapura and Jaitu, the approximate borewell depth required for domestic use typically ranges from 150 to 300 feet. However, due to the falling water table and agricultural pressure, deeper "tube wells" reaching 400 to 500 feet are becoming the norm to access more stable aquifers. The cost involved in Faridkot is dictated by the "Rotary Drilling" method, which is ideal for alluvial soil. Expenses primarily cover the drilling per foot and high-quality UPVC casing pipes, which are essential to prevent the fine sandy layers from collapsing into the well.
Groundwater quality in Faridkot is a subject of significant local concern. While the water is generally "Sweet" in shallower zones, deep-bore water often exhibits "Salty" or "Brackish" characteristics. The district is known for having "Hard Water" with high levels of calcium and magnesium, causing scaling in pipes. More critically, the Malwa region, including Faridkot and Bargari, has reported elevated levels of Total Dissolved Solids (TDS), often ranging between 800 and 2,500 ppm. There is also a noted presence of trace elements like fluoride and uranium in specific pockets, which can impart a slight "Metallic Taste" to the water.
Faridkot is a canal-rich district, with the Rajasthan Feeder and Sirhind Feeder providing essential surface water for the region. However, the municipal and corporation water supply often faces pressure, especially in growing urban wards and during canal closure periods for maintenance. This leads to frequent water shortage possibilities in the height of summer, making households and the agricultural sector heavily dependent on groundwater.
Is a borewell required in Faridkot? In the current urban landscape, a borewell is considered a vital lifeline. While the canal-fed tap water is preferred for drinking when available, its erratic supply schedule makes private borewells the only way to ensure 24/7 water for sanitation and household chores. In the surrounding villages, where the "Cancer Belt" concerns are high, many residents use deep borewells (over 400 feet) to bypass contaminated shallow layers, searching for cleaner, safer aquifers.
Groundwater extraction in Faridkot is strictly regulated by the Punjab Water Resources Regulation and Control Authority (PWRRCA). Given the "Over-exploited" status of groundwater in many blocks of Punjab, the approval procedure is designed to monitor and limit unnecessary extraction, particularly for commercial and industrial purposes.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.