| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 90 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 106 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 156 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 181 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
Borewell drilling in Dantewada involves navigating the complex crystalline basement of the Indian Peninsular Shield. The geological profile here is dominated by ancient Granite and Gneiss, which are known for their extreme hardness and lack of primary porosity. In Dantewada, groundwater is primarily stored within secondary fractures, fissures, and weathered zones (Murrum). Our drilling process utilizes high-pressure DTH (Down-the-Hole) hammers capable of penetrating these dense formations at significant depths. Because the water-bearing 'veins' are localized, we often recommend a professional geophysical survey to pinpoint the most productive fracture zones. We utilize heavy-duty button bits to ensure straight-hole verticality even in tilted rock layers. For long-term sustainability in Dantewada, we advise installing high-stage stainless steel submersible pumps designed to handle deep-head pressure. Our team ensures that the top weathered layer is properly cased with MS or UPVC pipes to prevent surface water contamination and borehole collapse. This systematic approach guarantees a reliable water source for agricultural, industrial, and residential needs across the region.
Technical Setup for Hard Rock Terrain:
High-Pressure DTH Hammering Rig for Granitic Formations.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Dantewada, the 6.5 inch dia drilling rate is ₹106 per feet. A typical 340 feet borewell here costs approximately ₹36,040 for drilling alone.
A: In Dantewada, the average water level is around 305 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 340 feet.
A: Casing pipe costs in Dantewada depend on whether you use MS (Mild Steel) or PVC. Given the Hard Rock soil, we recommend heavy-duty pipes to prevent borehole collapse.
A: According to Chhattisgarh regulations, a minimum distance of 250 to 500 meters is often required from public water sources in Dantewada to prevent aquifer depletion.
A: TDS levels in Dantewada typically range from 300 to 1200 ppm. Since the geology is Hard Rock, the mineral content is usually manageable with a simple RO system.
A: Yes, a 4.5-inch borewell is cost-effective for small families in Dantewada, though 6.5-inch is the standard for better pump options.
This Borewell Cost is also applicable to Dantewada, Geedam, Kuakonda, Katekalyan, Bacheli, Kirandul, Barsur, Nakulnar, Bhansi, Kamaloor, Cholnar, Gamawada, Karli, Nerli, Palnar, Sameli, Phulpad, Ghotpal, Dantewada Town, Bus Stand Area.
Dantewada is located in the southern part of Chhattisgarh within the mineral-rich Bastar plateau. The geological formation here is predominantly composed of hard crystalline rocks, including granite, gneiss, and banded iron formations (BIF). Drilling a borewell in Dantewada, especially in areas like Kirandul, Bacheli, and Geedam, requires heavy-duty DTH (Down-The-Hole) hammer rigs equipped to handle high-pressure rock penetration. The approximate depth required for a successful borewell typically ranges from 300 to 500 feet, though some upland areas may require deeper drilling to tap into fractured zones. The success rate in this district depends entirely on locating secondary porosity or fault lines in the rock. The cost involved is often higher than in the northern plains due to the abrasive nature of the iron-rich soil and the necessity for heavy casing in the upper weathered layers to prevent "caving" before reaching the solid rock bed.
The water quality in Dantewada is deeply influenced by the district’s rich mineral deposits and its dense forest cover. Residents and commercial entities in the district headquarters typically encounter the following water characteristics:
In Dantewada, the dependency on groundwater is critical due to the undulating terrain and the seasonal nature of local rivers like the Dankini and Shankini. While the Municipal Council provides water supply in the main town, the hilly topography makes it difficult to maintain consistent pressure in all wards. Furthermore, during the summer months, surface water sources can dwindle, making a private borewell a vital backup. For the mining-related industries, guest houses, and residential complexes in the district headquarters, a dedicated tube well ensures a 24/7 supply that is independent of the public infrastructure. The possibility of water shortage is mostly felt in the higher altitudes of the district, where the water table can drop significantly during the pre-monsoon period, necessitating deep-bore solutions for sustained access.
Groundwater extraction in Dantewada is regulated under the Chhattisgarh Ground Water (Management and Regulation) Act to protect the tribal heartland's ecology. The localized procedure for obtaining a borewell permit involves:
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.