| Borewell Size (Diameter) | Recommended Usage | Rate Per Feet |
|---|---|---|
| 4.5 Inch Dia | Small Residential / Individual Home | ₹ 94 |
| 6.5 Inch Dia | Standard Home / Apartments / Shops | ₹ 111 |
| 7.5 Inch Dia | Commercial / Large Housing Society | ₹ 156 |
| 12 Inch Dia | Agriculture / Industrial High-Yield | ₹ 192 |
*Above Bore well cost for Ideal Drilling Depth
*For Narrow Space additional equipment required, hence may incur Extra Cost
* PVC Pipe Installation may varry based on the Soil / Rock type. Here we calculated Average !
Borewell drilling in Bankura involves navigating the complex crystalline basement of the Indian Peninsular Shield. The geological profile here is dominated by ancient Granite and Gneiss, which are known for their extreme hardness and lack of primary porosity. In Bankura, groundwater is primarily stored within secondary fractures, fissures, and weathered zones (Murrum). Our drilling process utilizes high-pressure DTH (Down-the-Hole) hammers capable of penetrating these dense formations at significant depths. Because the water-bearing 'veins' are localized, we often recommend a professional geophysical survey to pinpoint the most productive fracture zones. We utilize heavy-duty button bits to ensure straight-hole verticality even in tilted rock layers. For long-term sustainability in Bankura, we advise installing high-stage stainless steel submersible pumps designed to handle deep-head pressure. Our team ensures that the top weathered layer is properly cased with MS or UPVC pipes to prevent surface water contamination and borehole collapse. This systematic approach guarantees a reliable water source for agricultural, industrial, and residential needs across the region.
Technical Setup for Hard Rock Terrain:
High-Pressure DTH Hammering Rig for Granitic Formations.
*Regulations updated as per 2026 state-wise groundwater policies. Non-compliance may lead to sealing of the borewell and environmental fines.
A: For residential properties in Bankura, the 6.5 inch dia drilling rate is ₹111 per feet. A typical 310 feet borewell here costs approximately ₹34,410 for drilling alone.
A: In Bankura, the average water level is around 265 feet. However, to ensure a perennial supply, we recommend an ideal drilling depth of 310 feet.
A: Robotic or sensor-based drilling in Bankura is more precise and slightly more expensive than the base ₹111/ft rate but ensures higher safety.
A: Rainwater harvesting is the best way to recharge dry wells in Bankura. We install recharge pits that channel terrace water into your Hard Rock aquifers.
A: A professionally drilled well in Bankura using high-quality materials can last 20-30 years, especially in stable Hard Rock formations.
A: The Hard Rock soil determines the bit type we use. Harder formations require tungsten carbide bits which we use as standard in Bankura.
This Borewell Cost is also applicable to Bankura Town, Bishnupur, Khatra, Mejia, Sonamukhi, Patrasayer, Indas, Barjora, Gangajalghati, Saltora, Sarenga, Ranibandh, Simlapal, Taldangra, Kotulpur, Joypur, Borjora Industrial Area, Lokpur, Katjuridanga, Kenduadihi.
Bankura, positioned in the red lateritic and semi-arid belt of West Bengal, faces a complex water landscape. The district is characterized by an undulating terrain where surface water resources like the Damodar and Kangsabati rivers often see diminished flows during the scorching pre-monsoon months. In areas such as Chhatna, Saltora, and Gangajalghati, the dependency on groundwater is absolute, yet the availability is limited by the underlying hard-rock geology. The possibility of water shortage is high, particularly in the western sectors where the water table can drop significantly, leaving traditional dug wells dry. For residents in Bankura town and expanding suburban pockets like Mejia or Ranibandh, a borewell is no longer optional—it is a vital requirement to bridge the gap between irregular municipal supply and the high daily demands of households and local agriculture. To ensure perennial water security, tapping into deeper, fracture-fed aquifers via a professionally drilled borewell is the most dependable solution for the region.
The extraction of groundwater in Bankura is strictly regulated by the State Water Investigation Directorate (SWID) under the West Bengal Ground Water Resources (Management, Control and Regulation) Act. Navigating the localized approval process is crucial to ensure legal compliance and environmental sustainability. The following steps are mandatory for property owners in the district:
The groundwater quality in Bankura is deeply influenced by the district's distinct soil types, ranging from the hard crystalline rocks of the west to the alluvial plains of the east. Residents in various blocks encounter the following water profiles:
Geologically, Bankura presents a formidable challenge for drilling due to the presence of the Precambrian crystalline basement—primarily granite and gneiss. In these hard-rock terrains, water is stored in secondary fractures and weathered "murrum" zones rather than large underground pools. To reach a sustainable water-bearing vein in areas like Khatra or Mejia, drilling depths usually range between 300 to 450 feet, though some deep-bore systems may extend to 600 feet for commercial purposes. The use of high-pressure DTH (Down-the-Hole) hammer rigs is essential to penetrate the dense rock formations found here.
The financial and technical aspects involved in Bankura include:
Despite the initial investment and the challenges of hard rock drilling, a borewell remains the most cost-effective long-term water asset for the people of Bankura district.
Find the borewell cost for your land based on the state, city, and locality. The cost estimate for a borewell tends to vary from area to area. For example, the borewell cost in a village is not the same as the cost in a city. It also depends on factors such as the accessibility of the borewell point, the type of soil (rock or loose soil), labor rates in the locality, PVC pipe and lid prices, and the availability of borewell equipment nearby.